Job Overview

Responsible for developing, programming, and sustaining CNC lathe machining processes within a precision manufacturing environment. This role focuses on CNC turning (including live tooling), SolidWorks modeling, CNC CAM programming (Mastercam/Esprit), process development, and production support to ensure efficient, repeatable, and high-quality manufacturing. Primary objective is to improve machining efficiency, reduce cycle time, and support on-time delivery through robust process design and hands-on shop floor execution.

Please note: This position may involve working with technical data, technology, software/source code, hardware, or other items (collectively “items) subject to U.S. and non-U.S. export control laws and regulations.  Under these regulations, it may be necessary for TE to verify a candidate’s national origin and/or citizenship status to determine whether a U.S. or other government export license is required prior to releasing its technologies to the candidate.  If TE determines that TE will require a license or will be prohibited by applicable laws from providing the candidate with items necessary for the performance of this position, then TE expressly reserves the right to either a) make an offer of employment contingent upon TE receiving required export licenses from the appropriate government agency, b) consider the candidate for a different position that is not subject to such restrictions, on whatever terms and conditions TE shall establish in its sole discretion, or c) decline to move forward with the candidate’s application.

Job Requirements

CNC Lathe Programming

• Develop, program, and optimize CNC lathe programs (multi-axis with live tooling)
• Generate efficient toolpaths to maximize productivity and surface finish quality
• Select tooling, cutting strategies, and speeds/feeds appropriate for materials and geometry
• Support program prove-out, debugging, and optimization on the shop floor

CNC CAM (Mastercam / Esprit)

• Create and maintain CNC programs using Mastercam and/or Esprit
• Optimize toolpaths for turning, mill-turn, and complex geometries
• Maintain program revision control and ensure consistency across jobs

SolidWorks Modeling

• Create and modify 3D models and manufacturing drawings in SolidWorks
• Support design for manufacturability (DFM) reviews
• Develop models for fixturing, workholding, and process validation

Process Development

• Develop and document machining processes for new and existing components
• Define workholding, tooling, and datum strategies
• Establish repeatable processes capable of meeting tolerance and quality requirements

Production Support

• Provide hands-on support to machinists and operators during setup and production
• Troubleshoot machining issues related to tooling, geometry, or machine performance
• Drive process stability and consistency across production runs

Continuous Improvement

• Identify opportunities for cycle time reduction and throughput improvement
• Reduce scrap and improve first-pass yield
• Support lean manufacturing and cost reduction initiatives

Documentation

• Create and maintain setup sheets, work instructions, tooling lists, and process documentation
• Maintain program revision control and configuration management

Cross-Functional Collaboration

• Work with Design Engineering, Quality, and Operations to ensure manufacturability
• Support root cause analysis and corrective action efforts

Safety & Compliance

• Ensure safe machining practices and adherence to safety standards
• Comply with all company and regulatory requirements

What your background should look like

• Bachelor’s degree in Manufacturing Engineering, Mechanical Engineering, or equivalent experience
• 3–6 years of CNC machining / programming experience (lathe-focused)
• Strong experience with CNC turning (multi-axis preferred, including 2-axis, 3-axis, and mill-turn/live tooling environments)
• Strong working knowledge of CNC CAM software (Mastercam and/or Esprit)
• Proficiency in SolidWorks (modeling and drawing creation)
• Strong understanding of GD&T and machining tolerances

Preferred Qualifications

• Advanced experience with CNC CAM software (Mastercam and Esprit preferred)
• Experience with multi-axis CNC machines (5 to 9 axis preferred)
• Experience with mill-turn or Swiss-type machines
• Familiarity with ERP/MES systems
• Knowledge of lean manufacturing principles

Key Competencies

• CNC turning and multi-axis programming expertise
• Strong analytical and troubleshooting capability
• Deep understanding of cutting tools, workholding, and machining dynamics
• Effective communication with shop floor personnel
• Attention to detail and commitment to quality

Performance Metrics

• Cycle time reduction
• Scrap and rework reduction
• On-Time Delivery (OTD) support
• Process capability and repeatability
• Program efficiency and machine uptime

Role Scope

• Individual contributor role
• Primarily site-based with hands-on shop floor engagement
• Limited travel (if required)

Competencies